Why sandblasting doesn’t belong in wheel prep: Meet the smarter and cleaner wheel prep solution
By WheelRestore
When you think of prepping alloy wheels, many picture clouds of abrasive dust, noisy compressors, and manual labor-intensive sandblasting setups. While sandblasting is a long-standing method widely used in industries like shipbuilding, construction, and general metalwork, it’s far from ideal for today’s alloy wheel refurbishment.
In fact, using a sandblasting cabinet for alloy wheels can be unnecessarily harsh, inconsistent, and environmentally unsustainable. It’s a method built for bulk, not precision. For wheel repair, it often means wasted media, higher labor costs, and avoidable dust emissions—especially problematic in clean workshop environments.
But there’s a better way: the WM750 Wheel Blasting Machine from Wheel Restore.
Watch the closed-cabinet WM750 in action – featuring media recycling, a clean blast path, and a cycle time of under three minutes.
A more profitable alternative to alloy wheel sandblasting
At Wheel Restore, we’ve reimagined surface preparation with a smarter, cleaner, and more profitable alternative to traditional methods (sandblasting or abrasive blasting). Methods where blasting media is used once and discarded, driving up both costs and waste.
Purpose-built specifically for alloy wheels, the WM750 Wheel Blasting Cabinetreplaces outdated alloy wheel sandblasting machines with a closed, semi-automated process that’s clean, consistent, and fast. Designed with built-in filtration and recyclable blasting media, it offers a dedicated solution that minimizes waste, protects operators, and prepares wheels in under three minutes with minimal training required.
Unlike conventional sandblasters for alloy wheels, the WM750 is a wheel-dedicated blasting cabinet that uses recyclable media, not sand, for ultra-efficient surface prep.
OUR BLASTING MEDIA ISN’T DISPOSABLE. IT’S REUSABLE
With built-in filtration and cyclone separation, the WM750 recycles its media multiple times, cutting both waste and cost.
The hidden cost of sandblasting
Sandblasting might seem like a straightforward solution for wheel preparation, because it is already used in other industries, and can easily be adapted to wheel preparation. However, beneath the surface, this method is riddled with inefficiencies that quietly erode your bottom line.
Every wheel you prep manually demands not just your technician’s time, but a steady stream of consumables that are used once and thrown away. On top of that, the cleanup and waste management requirements turn what should be a simple prep step into a labor-heavy, environmentally unfriendly process.
Here’s what sandblasting really costs you:
Average sandblasting media cost: Up to €1.00 per wheel
Labor time: Often 20–25 minutes per wheel
Disposal costs: Additional waste handling or environmental fees
At Wheel Restore, we believe sandblasting has no place in modern alloy wheel repair. It’s not precise, it’s not clean, and it’s certainly not efficient. If you’re aiming for consistent quality, fast turnaround, and a scalable business model – alloy sandblasting simply isn’t the right solution for the job.
Sandblasting equipment compared to the WM750 Wheel Blasting Machine
Our blaster is designed to eliminate all the wasteful steps of sandblasting – both literally and financially. It’s purpose-built, semi-automatic machine that streamlines wheel prep with precision, speed, and built-in sustainability. Instead of paying more for less, you’ll be reducing your costs while improving throughput and cleanliness.
Here’s how the WM750 transforms your operation:
Media usage: Only 9–10 grams per wheel
Cost per wheel in blasting powder: €0.08
Labor time: Just 2–3 minutes per wheel
Filtration system: Recycles media automatically
Annual savings: Over €15,000/year for even small shops
Built-in media recycling with three precision media types
The WM750 Wheel Blasting Machine sets a new standard in efficiency and sustainability. Unlike a sandblasting machine that wastes media after one use, the WM750 features a cyclone separator and durable cartridge filter that recycles blasting media automatically.
Operators can choose from Fine, Medium, or Coarse blasting powders—ideal for prepping any wheel surface. Only unusable particles are filtered out, extending media life and keeping consumable costs low.
A built-in pressure switch monitors filter health, alerting you when maintenance is needed—preventing downtime and performance loss.
With up to 10x media reuse, the WM750 cuts waste by 90%, lowers disposal costs, and helps you run a cleaner, greener operation.
Smarter for you. Better for the planet.
If your workshop values efficiency, cleaner operations, and environmental responsibility, a wheel blaster is built to align with your goals—without compromise.
Here’s how it delivers smarter performance, every step of the way:
No toxic dust clouds: The closed-cabinet system with built-in filtration eliminates airborne contaminants, keeping your workspace clean and your team safer.
Minimal media consumption: With optimized blasting precision and media recycling, you use just grams per wheel cutting down costs and material waste.
Ultra-low energy use: Operating at just 280 watts, the WM750 uses less power than most shop lights, making it a cost-effective and energy-efficient solution.
Safe and compliant: Outfitted with an ATEX-certified exhaust fan, it meets stringent safety standards for dust control—even in high-compliance environments.
Versatile by design: Lightweight and compact, it’s equally at home in mobile vans or static workshop setups, with front-loading access and ergonomic controls.
Whether you’re prepping wheels for painting or powder coating, the WM750 gives you cleaner results, faster turnaround, and dramatically lower environmental impact—leaving outdated sandblasting methods firmly in the past.
Don’t just upgrade your equipment – Upgrade your business model
Gettingthe WM750 is not only an upgrade to your alloy wheel repair equipment but also a transformation in the operation of your workshop.
This is a shift away from outdated, waste-heavy processes and toward a smarter, leaner, and more scalable approach to wheel prep. In a market where every margin counts and sustainability is no longer optional, sticking with outdated wheel prep methods is costing you more than you think.
Ready to cut waste, reclaim time, and boost profits?
Explore how our wheel blasting cabinet fits your setup
English (United States) 
Danish 
English (UK) 
Italian 
German 
French (France) 
Dutch 
Swedish 
Spanish 
Dutch (Belgium) 
Bulgarian 
Japanese 
English (New Zealand) 
English (Canada) 
French (Canada) 
Arabic 
Thai 
Portuguese 
Korean 
Czech 
Polish 
Turkish 
Finnish
Why sandblasting doesn’t belong in wheel prep: Meet the smarter and cleaner wheel prep solution
When you think of prepping alloy wheels, many picture clouds of abrasive dust, noisy compressors, and manual labor-intensive sandblasting setups. While sandblasting is a long-standing method widely used in industries like shipbuilding, construction, and general metalwork, it’s far from ideal for today’s alloy wheel refurbishment.
In fact, using a sandblasting cabinet for alloy wheels can be unnecessarily harsh, inconsistent, and environmentally unsustainable. It’s a method built for bulk, not precision. For wheel repair, it often means wasted media, higher labor costs, and avoidable dust emissions—especially problematic in clean workshop environments.
But there’s a better way: the WM750 Wheel Blasting Machine from Wheel Restore.
Table of Contents
Watch the closed-cabinet WM750 in action – featuring media recycling, a clean blast path, and a cycle time of under three minutes.
A more profitable alternative to alloy wheel sandblasting
At Wheel Restore, we’ve reimagined surface preparation with a smarter, cleaner, and more profitable alternative to traditional methods (sandblasting or abrasive blasting). Methods where blasting media is used once and discarded, driving up both costs and waste.
Purpose-built specifically for alloy wheels, the WM750 Wheel Blasting Cabinet replaces outdated alloy wheel sandblasting machines with a closed, semi-automated process that’s clean, consistent, and fast. Designed with built-in filtration and recyclable blasting media, it offers a dedicated solution that minimizes waste, protects operators, and prepares wheels in under three minutes with minimal training required.
Unlike conventional sandblasters for alloy wheels, the WM750 is a wheel-dedicated blasting cabinet that uses recyclable media, not sand, for ultra-efficient surface prep.
With built-in filtration and cyclone separation, the WM750 recycles its media multiple times, cutting both waste and cost.
The hidden cost of sandblasting
Sandblasting might seem like a straightforward solution for wheel preparation, because it is already used in other industries, and can easily be adapted to wheel preparation. However, beneath the surface, this method is riddled with inefficiencies that quietly erode your bottom line.
Every wheel you prep manually demands not just your technician’s time, but a steady stream of consumables that are used once and thrown away. On top of that, the cleanup and waste management requirements turn what should be a simple prep step into a labor-heavy, environmentally unfriendly process.
Here’s what sandblasting really costs you:
At Wheel Restore, we believe sandblasting has no place in modern alloy wheel repair. It’s not precise, it’s not clean, and it’s certainly not efficient. If you’re aiming for consistent quality, fast turnaround, and a scalable business model – alloy sandblasting simply isn’t the right solution for the job.
Sandblasting equipment compared to the WM750 Wheel Blasting Machine
Our blaster is designed to eliminate all the wasteful steps of sandblasting – both literally and financially. It’s purpose-built, semi-automatic machine that streamlines wheel prep with precision, speed, and built-in sustainability. Instead of paying more for less, you’ll be reducing your costs while improving throughput and cleanliness.
Here’s how the WM750 transforms your operation:
Built-in media recycling with three precision media types
The WM750 Wheel Blasting Machine sets a new standard in efficiency and sustainability. Unlike a sandblasting machine that wastes media after one use, the WM750 features a cyclone separator and durable cartridge filter that recycles blasting media automatically.
Operators can choose from Fine, Medium, or Coarse blasting powders—ideal for prepping any wheel surface. Only unusable particles are filtered out, extending media life and keeping consumable costs low.
A built-in pressure switch monitors filter health, alerting you when maintenance is needed—preventing downtime and performance loss.
With up to 10x media reuse, the WM750 cuts waste by 90%, lowers disposal costs, and helps you run a cleaner, greener operation.
Smarter for you. Better for the planet.
If your workshop values efficiency, cleaner operations, and environmental responsibility, a wheel blaster is built to align with your goals—without compromise.
Here’s how it delivers smarter performance, every step of the way:
No toxic dust clouds: The closed-cabinet system with built-in filtration eliminates airborne contaminants, keeping your workspace clean and your team safer.
Minimal media consumption: With optimized blasting precision and media recycling, you use just grams per wheel cutting down costs and material waste.
Ultra-low energy use: Operating at just 280 watts, the WM750 uses less power than most shop lights, making it a cost-effective and energy-efficient solution.
Safe and compliant: Outfitted with an ATEX-certified exhaust fan, it meets stringent safety standards for dust control—even in high-compliance environments.
Versatile by design: Lightweight and compact, it’s equally at home in mobile vans or static workshop setups, with front-loading access and ergonomic controls.
Whether you’re prepping wheels for painting or powder coating, the WM750 gives you cleaner results, faster turnaround, and dramatically lower environmental impact—leaving outdated sandblasting methods firmly in the past.
Don’t just upgrade your equipment – Upgrade your business model
Getting the WM750 is not only an upgrade to your alloy wheel repair equipment but also a transformation in the operation of your workshop.
This is a shift away from outdated, waste-heavy processes and toward a smarter, leaner, and more scalable approach to wheel prep. In a market where every margin counts and sustainability is no longer optional, sticking with outdated wheel prep methods is costing you more than you think.
Ready to cut waste, reclaim time, and boost profits?
Explore how our wheel blasting cabinet fits your setup